Yamaha DM1000 Owner's Manual page 369

Meter Bridge Controls
5
4
3
2
1
MB1000 Peak Meter Bridge
A
Channel indicators
These indicators display the channels for which the lev-
els are currently displayed (Input Channels 1-16, 17-32,
33-48, Aux Outs 1-8, Bus Outs 1-8).
B
INPUT METERING POSITION indicators
These indicators display the current metering position
specified for the Input Channels.
8
C
OUTPUT METERING POSITION indicators
These indicators display the current metering position
specified for the Output Channels.
D
[PEAK HOLD] button
This button turns the Peak Hold function on or off.
When the Peak Hold function is turned on, the button
indicator lights up. This button works in unison with
the PEAK HOLD button displayed on the Meter display.
6
E
TIME CODE display
This display indicates the timecode or MIDI clock value
the DM1000 is receiving or generating.
F
[1-16] / [17-32] / [33-48] / [REMOTE 1] /
[REMOTE 2] / [MASTER] buttons
These buttons select the layers of the channel meters dis-
played on the meter bridge. The button indicator of the
currently-selected layer lights up.
If you turn on the Meter Follow Layer check box on the
Setup | Prefer1 page (see page 250), the layer selection
on the meter bridge follows the layer selection on the
DM1000.
G
Level meters
These 12-segment LED level meters display the channel
levels of the selected layer.
7
H
Bus meters
These 12-segment LED meters display the signal levels
of Bus Outs 1-8.
369
DM1000—Owner's Manual