Yamaha DM1000 Owner's Manual page 122

Digital production console

Hide thumbs Also See for DM1000:

Table of Contents

Chapter 11—Surround Functions

When you select one of these Surround modes, each surround channel is routed to the

Buses speciﬁed on the Setup | Surr Bus page (see page 125).

The following table shows the factory-default Surround Channel to Bus Out assignment in

each Surround mode.

You can record each surround channel to a separate track to record surround panning. The

following diagram is an example in which each channel signal in 5.1 Surround mode is

recorded to digital MTR tracks.

Input Channel 1

Input Channel 2

Input Channel 3

Tip: You can set the surround pan either independently of normal panpots or in unison with

DM1000—Owner's Manual

8-TRACK DIGITAL