Yamaha DM1000 Owner's Manual page 107

Using the Encoders for Input Patching
By default, you can also use the Encoders on the top panel to change the Input Patching.
1 Press the ENCODER MODE [ASSIGN] button. The button indicator lights up.
By default, you can use the Encoders to change Input Patching while the [ASSIGN] button
indicator is lit.
Tip: On the Encoder page, you can specify the Encoder function that works while the
[ASSIGN] button indicator is lit (see page 35).
2 Rotate the Encoder of the Input Channel for which you want to change
patching. (Alternatively, press the corresponding Encoder push switch.)
The In Patch | In Patch page appears, and the cursor moves to the corresponding Input
Channel parameter box.
3 Rotate the Encoder to select the desired input/slot channel number you
want to patch.
4 Press the Encoder push switch to confirm the setting (or press the [ENTER]
button).
107
Input Patching
DM1000—Owner's Manual
9