Output Patch Library; Effects Library - Yamaha DM1000 Owner's Manual

Output Patch Library

The Output Patch library enables you to store and recall all Output Patch settings. The
library contains one preset memory and 32 user (readable & writable) memories.
To access the Output Patch library, press the DISPLAY ACCESS [OUTPUT PATCH] button
repeatedly until the Out Patch | Library page appears.
For details on storing and recalling memories, see "General Library Operation" on
page 165.
The Output Patch preset memory #0 contains the following settings:
OMNI OUT connectors 1–8
OMNI OUT connectors 9–10
OMNI OUT connectors 11–12
Channels 1–8 of Slot 1
Channels 9–16 of Slot 1
Channels 1–8 of Slot 2
Channels 9–16 of Slot 2
2TR OUT DIGITAL1 (L)
2TR OUT DIGITAL1 (R)
2TR OUT DIGITAL2 (L)
2TR OUT DIGITAL2 (R)

Effects Library

The Effects library enables you to store and recall Effects processor 1–4 programs. The
library contains 52 preset programs and 76 user (readable & writable) programs.
Note:
• The Effects library is shared by Effects processors 1–4. However, only Effects processor 1
enables storing and recalling Surround effects settings.
• Certain effects type settings recalled to Effects processor 1 disable Effects processors 2–4.
To store and recall settings to and from the library, you must locate the corresponding
Effects processor's page.
To access the Effects library, press the DISPLAY ACCESS [EFFECT] button repeatedly until
the library page for the desired Effects processor appears.
Aux Outs 1–8
Stereo Out L & R
Control Room Monitor L & R
BUS1–BUS8
BUS1–BUS8
BUS1–BUS8
BUS1–BUS8
Stereo Out L
Stereo Out R
Stereo Out L
Stereo Out R
169
Using Libraries
DM1000—Owner's Manual
15