Yamaha DM1000 Owner's Manual page 177

EQ Library
This library enables you to store and recall EQ settings for Input Channels, Bus Outs 1–8,
Aux Outs 1–8, and Stereo Out. The library contains 40 preset memories and 160 user (read-
able & writable) memories.
Follow the steps below to use the EQ library.
1 Press the SELECTED CHANNEL EQUALIZER [DISPLAY] button repeatedly to
display the EQ | EQ Library page.
1
2
A
CURRENT TYPE
This parameter displays the currently-selected channel EQ type (TYPE I or II).
B
CURRENT CURVE
This graph displays the current EQ curve.
C
Level meters
These meters indicate the post-EQ levels of the currently-selected channel and its avail-
able pair partner.
D
Type & Curve section
The type and curve of the currently-selected EQ program are displayed here.
2 Use the LAYER buttons to select layers, then press the [SEL] buttons to select
channels.
You can now store the selected channel EQ settings or recall the EQ library memories to
channels. For details on storing and recalling memories, see "General Library Operation"
on page 165.
The following table lists the preset memories in the EQ library:
No. Preset Name
Bass Drum 1
1
Bass Drum 2
2
Snare Drum 1
3
Snare Drum 2
4
Tom-tom 1
5
Cymbal
6
High Hat
7
Percussion
8
E. Bass 1
9
Description
Emphasizes the low range of a bass drum and the attack created by the
beater.
Creates a peak around 80 Hz, producing a tight, stiff sound.
Emphasizes "snappy" and rimshot sounds.
Emphasizes various ranges for that classic rock snare drum sound.
Emphasizes the attack of tom-toms, and creates a long, "leathery" decay.
Emphasizes the attack of crash cymbals, extending the "sparkling" decay.
Use on a tight high-hat, emphasizing the mid to high range.
Emphasizes attack and adds clarity to the high-range of instruments, such
as shakers, cabasas, and congas.
Produces a tight electric bass sound by cutting very low frequencies.
177
Using Libraries
3
4
DM1000—Owner's Manual
15