DM1000 V2.2 Supplementary Manual
The DM1000 System Software Version 2.20 features the following changes and additions (including the changes made
up to Version 2.05).
Changes and additions in Version 2.20
❏ More Add-On Effects Packages available (pages 161 and 180)
The following Add-On Effects Packages are now available:
Surround Post Package
Vintage Stomp Package
Due to this addition, effect memories #53 through 67 in the Effects library are now designated as preset effects pro-
grams. These preset programs are dedicated to Add-On Effects. The numbers of effects programs that do not have
Add-On Effects installed are grayed out and cannot be used. The following effects programs in the Effects library
have been dedicated to the new Add-On Effects Packages.
Please refer to the following Yamaha website for the latest information on the Add-On Effects Packages:
❏ Additional trigger sources in the GPI OUTPUT section (pages 279 and 305)
The following parameters have been added as the trigger signal source in the GPI OUTPUT section.
xxx ON TALLY: The trigger signal is active only while the corresponding channel is turned ON.
The following parameters have been added in the OUTPUT list of the "GPI Trigger Source & Target List" on
CH1 ON TALLY
CH48 ON TALLY
BUS1 ON TALLY
BUS8 ON TALLY
AUX1 ON TALLY
AUX8 ON TALLY
ST ON TALLY
❏ About the DM1000 Editor version
If you use the DM1000 Editor (Studio Manager) to control the DM1000, update the DM1000 Editor to version
2.1.2 or higher (Studio Manager version 2.1 or higher).
If your Studio Manager CD-ROM version is not X5834B0, download the latest version from the following Yamaha