Yamaha DM1000 Owner's Manual page 54

54
Chapter 5—Analog I/O & Digital I/O
2 Use the cursor buttons to move the cursor to the 2TR IN D1 or 2TR IN D2
button, then press [ENTER].
The sampling rate converter for the selected 2TR Digital Input turns on or off. When on,
the sampling rate of the received digital audio is converted to the DM1000's current sam-
pling rate.
Tip:
• The FS box displays the sampling frequency at which the DM1000 is currently operating.
• The AES/EBU and COAXIAL parameter fields display the converted sampling rate. (If the
current wordclock is not synched, they display "Unlock.")
3 To convert the sampling rate of the signals input at the installed I/O card
inputs, press the DISPLAY ACCESS [DIO] button, then press the [F2] button.
The DIO | Format page appears.
Use the buttons in the SRC sections (
You can turn the sampling rate converters of the digital I/O cards on or off in pairs (odd &
even channels, in this order).
Note: The sampling rate converter is available only on the Yamaha MY8-AE96S Digital I/O
card. If you have installed other types of I/O cards in the slots, or if no cards are installed in
the DM1000, the buttons in the SRC sections are disabled.
4 Use the cursor buttons to move the cursor to any two-channel button in the
SRC sections (
The sampling rate converter for the selected 2-channel input turns on or off. When on, the
sampling rate of the received digital audio is converted to the DM1000's current sampling
rate.
DM1000—Owner's Manual
1
) to turn the sampling rate converters on and off.
1
), then press [ENTER].
1