Naming the Stereo Out and Bus Outs
You can change the default Bus names (BUS1, AUX4, STEREO, etc.). It may be convenient
to name the buses "Monitor Out" or "Effect Send," for example, so that you can easily iden-
tify the signal type.
1 Press the DISPLAY ACCESS [OUTPUT PATCH] button repeatedly until the Out
Patch | CH Name page appears.
You can specify Short names in the center column (
2
column (
).
2 Move the cursor to a name you wish to change, then press [ENTER].
The Title Edit window appears, which enables you to edit the name.
3 Edit the name, move the cursor to the OK button, then press [ENTER].
The new name is now effective.
Tip: The edited name is stored in the Output Patch library.
Naming the Stereo Out and Bus Outs
1
2
1
) and Long (full) names in the right
89
DM1000—Owner's Manual
7