Yamaha DM1000 Owner's Manual page 253

C
Channel Copy Parameter
This parameter selects the channel parameters to be copied when you assign the Chan-
nel Copy function to one of the User Defined buttons (see page 257). You can select
multiple options.
• ALL.................................This button selects all parameters that can be copied. When you
• FADER...........................Copies the fader values.
• ON..................................Copies the on/off status of the [ON] buttons.
• PAN ................................Copies the pan settings.
• SURR .............................Copies the surround pan settings.
• AUX................................Copies the Aux Send levels.
• AUX ON ........................Copies the on/off status of the Channel to Aux signals.
• EQ...................................Copies the EQ parameter values.
D
Fader Touch Sense
These parameters control the Touch Sense function.
• ENABLED/DISABLED ..This button enables or disables the Touch Sense function.
• CONTROL ....................If this button is turned on and the touch sensors are not trig-
• SELECT .........................If this button is on, you can select channels using the Touch
• Sensitivity .....................This parameter adjusts the touch sensitivity in the range of 01
E
Display Brightness
This parameter sets the brightness of the display, Scene Memory display, and the button
indicators in the range of 1 through 4.
Prefer3 page
This page enables you to set various Automix preferences.
This page contains the following parameters. (These parameters are explained in the order
from the top of the left column to the bottom of the right column).
• Mix Update Confirmation
If this check box is on, when Automix recording stops, a confirmation message appears ask-
ing if you want to update the current Automix with the latest edits.
turn on this button, all other options are cancelled.
gered, fader operations is ignored. During Automix recording,
you can perform "cut-in" style operations by touching a fader.
When this button is off, the DM1000 always recognizes fader
movements.
Sense function.
to 10.
253
Setting Preferences
DM1000—Owner's Manual
19