Table of Contents
Advertisement
24 Specifications
Temp
Complies with EN 12470-4:2000. Specified without transducer.
CO
2
The CO
Cor.1:2005 (except alarm system; alarm system complies with IEC 60601-2-49:2001).
266
To Purchase, Visit
Avobus.com
Invasive Pressure Alarm Specifications Range
Tachycardia
Bradycardia
Temp Performance Specifications
Temp
Range
Resolution
Accuracy
Average Time Constant
Temp Alarm Specifications
Range
Temp High/Low Alarms
–1 to 45°C (30 to 113°F)
measurement in the monitor, M3014A and M3015A complies with EN ISO 21647:2004 +
2
M3015A Microstream CO
2
CO
Range
2
Accuracy
Resolution
Stability
awRR
Range
Accuracy
Warm-up Time
or call
1-800-674-3655
Difference to high limit 0 to
50 bpm
Clamping at 150 to
300 bpm
Difference to low limit 0 to
50 bpm
Clamping at 25 to 100 bpm 5 bpm steps
–1 to 45°C (30 to 113°F)
0.1°C (0.2°F)
±0.1°C (±0.2°F)
Less than 10 seconds
Adjustment
-1 to 35°C (30 to 95°F), 0.5°C (1.0°F) steps
35 to 45°C (95 to 113°F), 0.1°C (0.2°F) steps
Performance Specifications
0 to 150 mmHg (0 to 20 kPa), or 20% CO
Up to 5 minutes during warmup: ±4 mmHg or 12%, whichever is greater
After 5 minutes warmup:
0 to 40 mmHg (0 to 5.3 kPa):±2.2 mmHg (±0.3 kPa)
Above 40 mmHg (5.3 kPa):±(5.5% + (0.08%/mmHg above 40 mmHg)) of
reading
These specifications are valid for 21% O
ambient temperature, up to 60 rpm in adult mode and 100 rpm in neonatal
mode. Outside of these conditions the accuracy reaches at a minimum
±4 mmHg or ±12% of the reading, whichever is greater.
Numeric: 1.0 mmHg (0.1 kPa)
Wave: 0.1 mmHg (0.01 kPa)
Included in Accuracy specifications
0 to 150 rpm
0 to 40 rpm: ±1 rpm
41 to 70 rpm: ±2 rpm
71 to 100 rpm: ±3 rpm
>100 rpm: ±5% of reading
5 minutes for full accuracy specification
Measurement Specifications
Adjustment
Delay
5 bpm steps
max.
14 seconds
5 bpm steps
5 bpm steps
max.
14 seconds
, whichever is lower
2
and N
balance, up to 35°C
2
2
Advertisement
Table of Contents
Troubleshooting
