Philips IntelliVue X2 Instructions For Use Manual page 136

7 ECG, Arrhythmia, ST and QT Monitoring
Additionally, when both ST maps are displayed, you can view the currently available ST values in the
ST Map window (Current or Trend) at any time. To do this, select the Show Values pop-up key.
The ST values are shown in place of the second ST map, and the pop-up key text changes to Hide
Values. Select the Hide Values pop-up key and the display shows both ST maps again.
Trend View
In trend view, you can see up to four trended ST maps, and the current ST map, simultaneously. You
can configure the time interval between trended samples. The most recent map is shown in the same
color as the parameter itself. Past values change from white through dark gray. In the diagram below,
the time interval between trends is 12 seconds. The first trended sample is white and is 12 seconds old.
The second trended sample corresponds to the ST values 24 seconds ago and so forth. The ST values
on the diagrams show the current ST values.
If a lead is turned off, its axis is no longer shown. This has no impact on the presentation of trended
values that were recorded while the lead was still on. In the diagram below, lead V4 was switched off 20
seconds ago. The current ST values and the first trended value reflect this change in the lead setup. All
other maps are displayed the way in which they were recorded.
128
To Purchase, Visit Avobus.com
Adult
SBed10
ST Map (Current)
ST-I
Limb Leads
ST-II
ST-VI
ST-V2
ST-V3
ST-V4
ST-V5
ST-V6
ST-aVF
Size Size Show
Up Down Baseline
SBed10
ST Map (Trend)
Limb Leads
Size Size
Up Down
Current Select
View Interval
or call 1-800-674-3655
ST-II HIGH
Hide
Values
Adult
ST-II HIGH
Chest Leads
5 min
Show Show
Baseline
Values
Print
Viewing ST Maps
ST values are shown where the
STmap for the chest leads is
normally displayed.
Select the Show Values pop-up
key to see the current ST values.
Select Hide Values and the
display shows both ST maps again.
trending interval
Scroll to view
more pop-up
keys