Table of Contents
Advertisement
Operating and Navigating
X2 Screen Elements
Item
5
6
7
8
9
10
11
Using the Touchscreen
Touch a screen element to get to the actions linked to that element. For example, touch a measurement
numeric and the setup menu for that measurement opens. Touch a wave to enter the setup menu for
that wave.
Measurement Setup Menus
Each measurement has a setup menu where you can perform operations or change settings. Typically,
the setup menu window covers the whole screen, with the exception of the INOP and alarm message
fields, which are always displayed at the top. The following picture is for illustration purposes, and may
not exactly represent what you see on the screen. We are using non invasive blood pressure as an
example, but all measurement setup windows are similar and share the same basic layout and
components.
Touch the measurement numeric on the screen to enter the setup menu.
Main screen
Bed4
Adult
HR
SpO
Pulse 60
Auto 15 min
Description
Measurement label
Paced status
Measurement numeric/values
Measurement wave
Status line
Measurement Selection key
Battery status indicator
Doe, John
2
Comments
Touch the measurement to enter the
measurement setup menu.
Displayed below the HR label.
Touch the numeric to enter the measurement
setup menu.
Touch the wave to enter the measurement
setup menu.
Shows information and messages prompting
you for action.
Opens the Measurement Selection window
which shows all measurements and where they
are physically located. From here you can also
enter the measurement setups.
Gives information about remaining battery
charge, estimated operating time, maintenance
requirements and malfunctions. See the
chapter "Using Batteries" on page 221.
Measurement setup menu
No Central Monit.
**
Setup NBP
Auto
NBP
Pulse 60
NBP meas. + autom. cycle started
Alarms :
Sys.
On
Mode :
Al. from :
Auto
Sys
Start/
Stop
Stop
All
2 Basic Operation
NBPs HIGH
08:28
Repeat:
15 min
NBP
STAT
1
2
3
4
5
19
Advertisement
Table of Contents
Troubleshooting
