Operating The Monitor - Philips IntelliVue X2 Instructions For Use Manual

1 Installation

Operating the Monitor

To complete installation you will need to operate the monitor to check basic functionality. Here is a
quick introduction to the monitor.
Switch on the monitor. After start-up the
1
monitor display will become active. You operate
the monitor using the touch screen.
Touch again to select an item on the menu and
3
work through the menu activities.
If you cannot find a menu by
5
touching the screen you can always
use the Main Setup SmartKey
which will get you to all menus on the monitor.
6
Operating the Monitor
Touch something on the screen (numerics,
2
waves, other screen items) to enter the
corresponding menu. Touching the NBP
numeric, for example, brings you to the
Setup NBP menu.
To access SmartKeys, press the SmartKeys
4
key. Main Setup is one of the
SmartKeys.
Press the Main Screen key to close all open
6
menus/windows and return to the main
screen. Press again to enter the Change
Screen window, where you can choose
from a number of pre-configured screens.