Table of Contents
Advertisement
20 Care and Cleaning
Cleaning the Monitor
Clean with a lint-free cloth, moistened with warm water (40°C/104°F maximum) and soap, a diluted
non-caustic detergent, tenside, ammonia- or alcohol-based cleaning agent. Do not use strong solvents
such as acetone or trichloroethylene.
Take extra care when cleaning the screen of the monitor because it is more sensitive to rough cleaning
methods than the housing. Do not permit any liquid to enter the monitor case and avoid pouring it on
the monitor while cleaning. Do not allow water or cleaning solution to enter the measurement
connectors. Wipe around, not over, connector sockets.
CAUTION
To clean the touch-enabled display, disable the touch operation by switching off the monitor during
the cleaning procedure, or by pressing and holding the Main Screen key for two seconds. Press the
Main Screen key again to re-enable touch operation.
Recommended cleaning agents are:
Disinfecting the Monitor
CAUTION
Solutions: Do not mix disinfecting solutions (such as bleach and ammonia) as hazardous gases may
result.
Hospital policy: Disinfect the product as determined by your hospital's policy, to avoid long term
damage to the product.
Clean equipment before disinfecting. Recommended types of disinfecting agents are:
Sterilizing the Monitor
Sterilization is not recommended for this monitor, related products, accessories or supplies unless
otherwise indicated in the Instructions for Use that accompany the accessories and supplies.
218
To Purchase, Visit
Avobus.com
Tensides (dishwasher detergents)
Ammonias
Alcohol
Base
Approved Agents
Alcohol
Ethanol up to 70%
1- and 2- Propanol up to 70%
Aldehyde
Glutaraldehyde up to 3.6%
or call
1-800-674-3655
Edisonite Schnellreiniger ® , Alconox ®
Dilution of Ammonia <3%, Window cleaner
Ethanol 70%, Isopropanol 70%, Window cleaner
Cleaning the Monitor
Advertisement
Table of Contents
Troubleshooting
