Launching A Real Time Chart - Paradyne OPENLANE User Manual

Launching a Real Time Chart

"
7800-A2-GB28-80
All data for Real Time Charts is gathered and plotted for charts using the value of
the Real Time Polling Frequency. You can change this polling frequency for an
individual chart if you use the Launch Graph dialog.
Procedure
To launch a Real Time Chart that uses the Real Time Polling Frequency:
1. Click on an interface or DLCI in the Device Display Area of Navigation
Wizard. The chart types that are available to you depend on the device you
select.
For example, the following screen example shows a highlighted DLCI. The
chart types available for this DLCI include Throughput, Congestion, and
Analysis.
May 1999
Using the Navigation Wizard
2-15