Part 3 Set Up An Ip Address For The Wan Interface; Part 4 Delete The Pvc For Mer - Paradyne 6212 User Manual

3. Type 1483mer to display the command to set up an MER entry. The command usage is
shown below. For the port parameter specified in the command, always type mer0. Only one
MER entry can be created.
EXAMPLE
4. If the sndcp prompt pops up, a PVC 0/35 is successfully created for MER mode.
3.6.3

PART 3 Set up an IP address for the WAN interface

1. Return to the home prompt and type the following command.
If you need the usage of the ifconfig command, type ifconfig.
2. If the WAN IP address is successfully set up, the home prompt pops up.
3.6.4

PART 4 Delete the PVC for MER

To delete the PVC set up for the MER, you must delete the profile first under the sndcp prompt.
Secondly, delete the VC under the atm prompt. The following screen is an example.
1800-A2-GB20-00
Command Line Interface User's Guide
37