Vlantable; Vlanmode - Paradyne 6212 User Manual

5.3.11

vlantable

vlantable groupNumber(0 - 3) -o ethernetPort(1 - 4) -atm vci vpi
configures the VLAN groups. Up to four groups (0-3) can be set up, and four Ethernet ports (0-
3) can be joined to these groups.
COMMAND DESCRIPTION
groupNumber(0 - 3)
There are four groups. Use the number (0-3) to represent each group.
ethernetPort[0] -> Link4
ethernetPort[1] -> Link3
ethernetPort[2] -> Link2
ethernetPort[3] -> Link1
ethernetPort(0 - 3)
Each LAN interface can only be attached to one VLAN.
0- Ethernet port 1
1- Ethernet port 2
2- Ethernet port 3
3- Ethernet port 4
vci vpi
Type the VCI/VPI value for the VLAN. You can only select from values that have been
configured as Bridge mode on the WAN interface.
EXAMPLE
vlantable 0 -o 0 1 2 3 -atm 0 33
5.3.12

vlanmode

vlanmode [on/off]
Enables or disables VLAN. After VLAN is enabled, also configure it's functions like fdbmode,
igmpsnooping, and
COMMAND DESCRIPTION
1800-A2-GB20-00
Command Line Interface User's Guide
59