Displaying; Configuration - Paradyne 6212 User Manual

Command Line Interface User's Guide
4.5.2

Displaying

Command syntax:
listphones
Usages:
Display the Configured sip parameters of all the configured phones.
Example:
#### PHONELIST ####
port User DispName Expires QValue Codec Frame CallerID DTMF
----------------------------------------------------------------------------
1 600 600
Buddy List (List of remote user(s) one wish to call, only works when not using proxy)
4.5.3

Configuration

Command syntax:
addbuddy <speeddial> <userName> <destIPAddr> -o [-d<displayName>] [-p<destPort>]
Usages:
The BUDDY LIST is used to setup SIP URI of the parties that one wish to call.
Description:
speeddial:
dialing on key/phone pad.This should be unique for different SIP-URI.
userName:
destIPAddr:
displayName:
destPort:
Example:
addbuddy 1234 5551234 192.168.1.2
42
120 0.8 PCMU
is speedDial number which maps to remote party SIP-URI after
Name of the remote User who is to be contacted.
is the IP address of the party one wish to call.
Port Number of Remote User-Agent where it will
all the SIP messages.Default Port Number is 5060.
20 ENABLE
Display Name of the above remote user.
Receive
1800-A2-GB20-00