Rarpd; Timeout; Baudrate - Paradyne 6212 User Manual

2.6.4

rarpd

rarpd <-a | interface>
The rarpd command starts the RARPD on the specified interface or all the interfaces.
EXAMPLE
rarpd eth0
This command starts the RARPD on eth0 interface.
rarpd eth0
If RARPD is already running the above command, it displays: "Rarpd is already running on the
interface"
rarpd -a
This command starts the RARPD on all the interfaces.

2.7 timeout

timeout -t(telnet) n(seconds)
The timeout command sets up the timeout period for the telnet session
COMMAND DESCRIPTION
<seconds>
the timeout period in seconds, which can be up to 300 seconds.
EXAMPLE
timeout -t 300
The command configures the timeout period to 300 seconds.

2.8 baudrate

baudrate <value>
1800-A2-GB20-00
Command Line Interface User's Guide
27