Login - Paradyne 6212 User Manual

Command Line Interface User's Guide

1.2 Login

To access Telnet to manage your endpoint, complete the following steps: The default IP address
is 192.168.1.1. Use the default IP address to log on to the endpoint if it was not changed.
STEP 1 Make sure that the endpoint and your PC are on the same network
segment.
STEP 2 Connect your endpoint to a PC via the LAN
STEP 3 Click RUN from Windows Start menu and type:
telnet x.x.x.x
(where x.x.x.x represents the IP address of the endpoint).
STEP 4 You will be prompted to enter a User Name and Password. Enter
root
for the User Name and
1234
for the Password.
The first prompt of the CLI interface appears. The prompt shows the
STEP 5
user name (ex. 1234) used to log to the endpoint.
login: root
Password:
[1234@ home]$
Note: If you fail to access the endpoint, make sure both your PC and the endpoint are in the same IP
domain. If you do not know the endpoint's IP address, press the recessed button on the rear
panel to restore the default LAN IP address (192.168.1.1).
12 1800-A2-GB20-00