Consultation Call Hold; Call Resume; Call Switch; Call Waiting - Paradyne 6212 User Manual

4.13.2

Consultation Call Hold

This feature enables the user to hold his conversation and allows making a new
connection (consulting connection) to another user. User by pressing * key followed
by 2(Normal Hold) and dialing a valid number after getting dial tone invokes
consultation.
4.13.3

Call Resume

This feature provides the user to Resume his conversation after it was hold.
Pressing * key followed by 3 enables this feature.
4.13.4

Call Switch

This feature allows user is to switch between the connections if there are 2 calls
active at one time. User by pressing * key followed by 2 then pressing * key followed
by 5 enables this feature.
4.13.5

Call Waiting

This feature provides user to switch and talk to two different remote users. User by
pressing * key followed by 2 after hearing intermittent call-waiting tone hold the
active call. Then pressing * key followed by 5 allow the waiting user to talk. Now user
can either terminate the by pressing * key followed by 9 or hold by pressing * key
followed by 2 current active call and switch to earlier call by pressing * key followed
by 5.
1800-A2-GB20-00
Command Line Interface User's Guide
49