Filter - Paradyne 6212 User Manual

Command Line Interface User's Guide
span
span enable | disable
Enables to disable the spanning tree protocol.
list
list
Lists the spanning tree configuration.
5.3.16

filter

filter <action> <mac_address> -o [-fwd | -drop]
Configures the filtering capability of MAC addresses for the bridge. Up to 128 addresses may be
specified.
COMMAND DESCRIPTION
<action>
Action may be add, delete, or modify.
<mac_address>
The MAC address that is to be filtered. The address is specified by a hex code for each byte
separated by a colon (:). For example: 00:01:33:44:5F:2C.
-fwd
When specified, the frame will be forwarded. This is the default.
-drop
When specified, the frame will be dropped.
EXAMPLE
filter add 1:2:3:4:5:6
Forward packets whose MAC destination address is 1:2:3:4:5:6.
filter add 2:3:4:4:5:2 -o -fwd
Forward packets whose MAC destination address is 2:3:4:4:5:2.
filter add 11:22:33:44:55:66 -o -drop
Drop packets whose MAC destination address is 11:22:33:44:55:66
filter delete 1:2:3:4:5:6
Remove the filter action for MAC address 1:2:3:4:5:6
62 1800-A2-GB20-00