Policy Enable; Policy Disable; Policy List; Nat - Paradyne 6212 User Manual

5.5.4

policy enable

policy enable <QoS-Policy-ID>
Enable the firewall rule.
5.5.5

policy disable

policy disable <QoS-Policy-ID>
Disable the firewall rule.
5.5.6

policy list

policy list [default] [<IfName1>] [<IfName2>]
List the firewall rule.
EXAMPLE
policy set eth0 atm0 2 allow srcip 192.168.1.23 dstip 172.16.1.100 proto tcp
5.5.7

nat

nat
nat <interface> [-alias_address <addr>]
[-unregistered_only yes|no]
[-same_ports yes|no]
[-status]
[-disable]
[-enable]
The nat command contains several command options to set up different functions of the NAT.
COMMAND DESCRIPTION
-alias_address a.b.c.d
Address to use for aliasing
-unregistered_only [yes|no]
1800-A2-GB20-00
Command Line Interface User's Guide
71