The configcf command is used to configure the authentication username and
password.
Description:
portnumber:
username:
password:
Example:
configauth 1 123 abc
4.7.2
Displaying
Command syntax:
listauth
Usages:
Display the authentication information.
Example:
#### AUTHLIST####
---------------------------------
1
123
4.8 Registration
Command syntax:
register <PortNumber>
Usages:
send Register request to Registrar server and phone corresponding to the port
number is registered with proxy/registrar.
Description:
portNumber:
1800-A2-GB20-00
phone port number for which the configuration will be done.
Presently Valid values are 1or 2.
Username for authentication.
Password for authentication.
abc
port number of the Phone connected to SIP UA.
Command Line Interface User's Guide
45