Paradyne 1823 Quick Installation Instructions

1823 VoIP Gateway
Quick Installation Instructions
Document Number 1823-A2-GZ10-00
May 2005
Installation
➊
Connect the power adapter to the Power jack of the 1823
VoIP Gateway, and then plug the power adapter into an AC
wall outlet.
➋
Use an RJ11 connector cable to connect an analog
telephone to the Phone1 port, and, if your service provider
has provisioned two lines, the Phone2 port. An RJ11 cable
is supplied with the gateway.
➌
Use RJ45 cables to connect the LAN 1X, 2X, and 3X ports
of the gateway to your Ethernet devices, such as a hub or
the Ethernet port of your PC. An RJ45 cable is supplied with
the gateway.
➍
Connect the WAN port of the gateway to your ADSL or cable
modem's LAN port with an RJ45 cable. (If your modem's
LAN port is currently connected to your PC, disconnect the
cable from the modem's LAN port and use it to connect your
PC to one of the LAN ports of the gateway. Then use
another RJ45 cable to connect the WAN port of the gateway
to your modem's LAN port.)
See the user's guide on the CD for more information.
Copyright 2005 Paradyne Corporation. Printed in U.S.A.
*1823-A2-GZ10-00*
*1823-A2-GZ10-00*