Agconfig; Firewall; Policy - Paradyne 6212 User Manual

5.4.9

agconfig

agconfig $interface -o $port
This command sets up the SNMP agent
COMMAND DESCRIPTION
$interface
interface on which agent will run, such as eth0, mer0, atm0....atm7, and ppp0....ppp7.
$port
Port Number (the default port No is 161)
EXAMPLE
agconfig atm0 -o 121
If the SNMP agent is running, to configure its parameters, first shut it down by using the
shutdown command, and then you can configure the parameters.

5.5 Firewall

Stateful dynamic filtering with transparent proxies is provided to meet the demanding security
needs of today's Internet. Stateful firewalls store state and context data, which are updated
dynamically. This provides virtual session information for tracking connection-oriented and
connectionless protocols. Each connection also keeps the set of actions that need to be performed
on the packets, to avoid the classification process for further IP datagrams in the same
connection. Once the connection entry for a flow is created, then all other packets that belong to
the connection only need to recognize the classification for flow identification. This way, the
throughput is significantly boosted.
5.5.1

policy

firewall rule setting
1800-A2-GB20-00
Command Line Interface User's Guide
69