Part 3 Delete The Pvc For Ipoa; Pppoe; Part 1 Create A New Vc; Part 2 Set The Pvc To Pppoe - Paradyne 6212 User Manual

4. If the sndcp prompt pops up, a PVC 0/35 is successfully created for the IPoA mode.
3.3.3

PART 3 Delete the PVC for IPoA

To delete the PVC set up for IPoA, you must delete the profile first under the sndcp prompt.
Secondly, delete the VC under the atm prompt. The following screen is an example.

3.4 PPPoE

3.4.1

PART 1 Create a new VC

1. Type atm at the home prompt to enter the atm directory.
2. Type vcadd 0 35 ubr aal5
3. At the atm prompt, type home or exit to return to the home prompt.
3.4.2

PART 2 Set the PVC to PPPoE

1. Return to the home prompt.
2. Type sndcp to enter the sndcp prompt.
3. Type pppoe to display the command usage to set up a PPPoE entry. The command is shown
below.
1800-A2-GB20-00
Command Line Interface User's Guide
33