4.4.2
Displaying
Command syntax:
listcodecs
Usages:
Displays all the Configured Codecs.
Example:
#### CODECS INFO ####
PCMU PCMA
G729
---------------------
on
on
on
4.5 Phone
4.5.1
Configuration
Command syntax:
configphone <portNumber> <phoneUserName> -o [-d<DispName>]
[-e<expires>] [-q<qvalue>] [-c<PreferCodec>]
Usages:
This command Configures sip parameter required to build SIP messages for
phone(s) attached to SIP UA to send signaling information to peer.
Description:
portNumber:
phoneUserName:
expires:
PreferCodec:
Qvalue:
Example:
configphone 1 600 -o -c PCMU
1800-A2-GB20-00
port number of the SIP UA to which Phone is attached.
Presently Valid values are 1or 2.
Name of the User who is using the phone connected to
above portNumber.
Time period for registering to Registrar/ProxyServer.
Preference for the phone registered to proxy/registrar.
Command Line Interface User's Guide
phoneDisplayName:
Display Name of the above user.
preferred codec of this user.
41