Setwt; Listwt - Paradyne 6212 User Manual

Command Line Interface User's Guide
COMMAND DESCRIPTION
spoof list :
list the all the trusted and untrusted interfaces along with status
spoof enable :
Enable spoof protection
spoof disable :
Disable spoof protection
spoof eth1 trusted :
Set eth1 as trusted interface
spoof eth1 untrusted :
Set eth1 as untrusted interface
5.5.12

setwt

setwt
setwt <default_wt> <low_wt> <high_wt> <medium_wt>
<critical_wt> <real-time_wt> <premium_wt> <urgent_wt>
This command is used to configure weights to different traffic. The total weight of these queues
are 100. Weight Zero queues traffic will use default queue bandwidth
EXAMPLE
setwt 5 5 5 5 5 65 5 5
5.5.13

listwt

5.5.14
listwt
This command is used to display the pre-configured WFQ Weights.
EXAMPLE
listwt
WFQ Weights
====================
74 1800-A2-GB20-00