listusers
listusers
The listusers command lists all registered users to use cli/http/ftp.
EXAMPLE
[1234 @ auth]$ listusers
1
1234
2
pppoe
3
maylyne
4
may
5
pizza
[1234 @ auth]$
resetuser
The resetuser command resets the user password. This is an administrators command; ordinary
users can not use this. This command won't prompt for inputting the old password while
command "changepasswd" will.
EXAMPLE
[1234 @ auth]$ resetuser pppoe
Enter New password:
Confirm New password:
Password changed
[1234 @ auth]$
Resets the password for user "pppoe."
2.5 Ethernet IP Address
There are two configurable Ethernet interfaces, identified with eth0 and eth1 in CLI. Each
Ethernet interface provides two default IP addresses.
Interface eth0- 192.168.1.1 (primary) and 192.168.1.2 (alias)
Interface eth1- 192.168.2.1 (primary) and 192.168.2.2 (alias)
1800-A2-GB20-00
cli http ftp ADMIN
http
ADMIN
cli ftp
ADMIN
Command Line Interface User's Guide
ORDIN
ORDIN
23