Maplist; Addpublic - Paradyne 6212 User Manual

The local_addr specified in the addrdaddr command. If the local address is a single address or a
subnet address, the user should specify the local address/subnet address. If it is a range of
addresses, the user should specify the first address in the range.
Removes an address mapping that was specified in the addressmap command.
EXAMPLE
addressmap -local 192.168.2.1 -public 202.54.30.2
addressmap -local 192.168.2.10-192.168.2.100 -public 202.54.30.3
addressmap -local 192.168.2.0 -public 202.54.30.4
delrdaddr 192.168.2.1 (single ip address)
delrdaddr 192.168.2.10 ( range of ip address)
delrdaddr 192.168.2.0 (subnet address)
5.6.7

maplist

maplist
This command displays addressmap and port map entries.
EXAMPLE
5.6.8

addpublic

addpublic <public_addr>
This specifies the public IP address. Dot notation should be used.
EXAMPLE
1800-A2-GB20-00
Command Line Interface User's Guide
85