Natif; Links; Nat - Paradyne 6212 User Manual

Command Line Interface User's Guide
5.6.1

natif

natif [enable/disable/list] -o ifname
The natif command enables or disables the dynamic NAPT for the WAN interface (e.g., atm0,
ppp0, mero...), or displays the interface status.
EXAMPLE
natif enable -o mer0
enables NAPT for mero.
natif disable –o atm0
disables NAPT for atm0.
natif list
display the NAPT status of the interface.
5.6.2

links

links
This command displays the dynamic link table for NAPT.
5.6.3

nat

The nat command contains several command options to set up different functions of the NAT.
nat –o -unregistered_only
nat –o -same_ports [yes|no]
nat –o -alias_address x.x.x.x
nat –o --ifa network_if_name
nat –o --status [yes|no]
nat –o --disable [yes|no]
80 1800-A2-GB20-00