Ip Address - Paradyne 1823 User Manual

1823 VoIP Gateway User's Guide

3.1 IP Address

To log on to the device using a web browser, your workstation and the device should both be on the
same network segment. The default IP address of the gateway is 192.168.1.101.
For example, to configure the IP address under Windows XP:
1. In the Windows task bar, click on the Start button, and then click on Control Panel.
2. Double-click on the Network Connections icon.
3. In the LAN or High-Speed Internet window, right-click on the icon corresponding to your network
interface card (NIC) and select Properties. (Often this icon is labeled Local Area Connection.) The
Local Area Connection dialog box is displayed with a list of currently installed network items.
4. Ensure that the check box to the left of the item labeled Internet Protocol (TCP/IP) is checked,
and click on Properties.
5. Write down the current IP Address and Subnet Mask in the Internet Protocol (TCP/IP) Properties
dialog box. When you are done using the web interface, you will need to reconfigure your PC with
these values.
6. In the Internet Protocol (TCP/IP) Properties dialog box, click in the radio button labeled "Specify
an IP address" and type 192.168.1.x (where x is any number between 1 and 254, excluding 101)
in the IP Address field.
7. Type 255.255.255.0 in the Subnet Mask field.
8. Click on OK twice to confirm your changes, and close the Control Panel.
12 May 2005 1823-A2-GB20-00