Logger; Logseverity; Log - Paradyne 6212 User Manual

Command Line Interface User's Guide

2.3 logger

logseverity

log

logftpserver
loginfo
logadd
2.3.1 logSeverity
logseverity -o error/info on/off
This command is used to set the trace for the log severity level.
COMMAND DESCRIPTION
error/info
This option specifies the severity level.
on/off
This option specifies weather the trace is set or not.
EXAMPLE
logseverity -o error on
This command will set the trace for the log level "error".
logSeverity -o [error/info] [on/off ]
This command is used to set the specified log level as ON or OFF. By default, error and info log
level messages are off. There is no on/off option for exception log level messages. The exception
log messages are always displayed (on).
2.3.2 log
log -o [ [all] / [<modulename>] [<loglevel>]]
This command is used to display the logged messages. The logged messages will be displayed
based on the specified module name or the log level or both the module and log levels.
COMMAND DESCRIPTION
<loglevel>
18 1800-A2-GB20-00