Auto Upgrade; Uploading The Configuration File - Paradyne 6212 User Manual

Command Line Interface User's Guide
4. The following message pops up if the software upload is successful.
putting app to xxx.xxx.xxx.xxx :
Sent bytes in seconds
tftp> connect 172.16.4.16
connected to : 172.16.4.16
tftp> binary
mode set to octet
tftp> put app sw2003.bin
putting app to 172.16.4.16 : sw2003.bin [octet]
Sent 983040 bytes in 3 seconds
tftp>

7.2 Auto Upgrade

When the modem is powered on, it will automatically execute the following command:
[root @ home] tftpAuto –o YES tftp.modem-update.com
OR
[root @ home] tftpAuto –o YES 168.95.1.1
The TFTP Server will check the firmware and configuration version.
If the version is older than the version in the TFTP Server, then the TFTP server will download
the updated firmware and configure files from the modem.

7.3 Uploading the configuration file

To upload the configuration file, use the put param command.
124
[octet]
1800-A2-GB20-00