Addressmap - Paradyne 6212 User Manual

Command Line Interface User's Guide
nat -o –alias_address 202.54.30.50
This command configures alias address as 202.54.30.50 and maps this IP address to a interface
and takes that as NAT interface.
ifa network_if_name
This command configures the specified WAN interface to use dynamic Network Address
Translation. For all packets transmitted from the WAN interface, the source address is modified
to use IP address of the WAN interface. The source port of the packet may be modified as
required. Packets received on the WAN interface will have their destination address modified
appropriately to reach the appropriate machine on the LAN network.
EXAMPLE
nat –o –ifa atm0
This command configures the WAN interface atm0 to use network address translation.
status
nat –o status
This command displays the NAT configurations, including NAT interface, alias IP address, same
port, and unregistered-only setting. This will display all the configured parameters on the nat
interface.
EXAMPLE
[1234 @ qosc]$ nat -o -status
Nat Interface: NONE
Alias Address: 0.0.0.0
same ports : YES
unregistered only : NO
disable
nat –o -disable
This command disables the NAT interface.
5.6.4

addressmap

addressmap -local [<local_addr> | <local_addr_range> | <local_subnet>] -public
82 1800-A2-GB20-00