Logftpserver; Loginfo - Paradyne 6212 User Manual

Loglevel can be given as exception, error or info.
<module name>
Module name can be all, ip, tcp, udp, sockets, rawip, icmp, arp, igmp, app, cdcli, if, telnet, dns,
snmp, http, ping, ftp, ftpd, tftp, bootp, dhcpc, dhcps, qosbw, ipsec, ike, nat, firewall, diffserv,
logger, queuing, ipoa, pppoa, ethoa, httpproxy, ftpproxy.
EXAMPLE
log –o all
This command will displays all the logged messages.
log –o firewall
This command will display messages logged from the firewall module.
log –o error
This command will display messages logged based on the log level "error".
log –o firewall error
This command will display the messages logged based on the log level "error" from the firewall
module.
2.3.3

logFtpServer

logFtpServer [server_address] [username] [password]
This command is used to configure the ftp server address, user login and password to store the
logger messages.
EXAMPLE
logftpserver 192.168.1.100 snaidu 12345
This command will configure the ftp server address as 192.168.1.100, username as snaidu and
password as 12345. While uploading the logged messages it opens a connection to the ftp server
on 192.168.1.100 and login as "snaidu". Then it will store the log messages in the file named
"fwlogfile".
2.3.4

loginfo

loginfo
1800-A2-GB20-00
Command Line Interface User's Guide
19