Ethernet Up/Down; Bridge; Arpproxy - Paradyne 6212 User Manual

Command Line Interface User's Guide
5.2.6

Ethernet up/down

The default setting of the Ethernet function is enabled. To disable it, use the down eth0
command. To enable it, use the up eth0 command. When the Ethernet interface is disabled, the
telnet or web session will be terminated. The endpoint can be only accessible from the console
port.

5.3 Bridge

The bridge commands sets up the bridge functions, covering the following commands. They are
located in the "bridge" directory.

arpproxy

pvc
group
group3
cachetimer
setmultiport
list
stats
bridge
vstats
vlantable
vlanmode
fdbmode
igmpsnooping
stp
filter
filterlist
filterflush
l2_list
l2_fil
5.3.1 arpproxy
arpproxy [on/off]
The arpproxy command enables or disables the ARP (Address Resolution Protocol) proxy (L3
bridging)
COMMAND DESCRIPTION
on
This enables the ARP proxy
54 1800-A2-GB20-00