User Account - Paradyne 6212 User Manual

Command Line Interface User's Guide
This command displays the configured logger information. This will contain the trace
information, ftpserver, and login information.
EXAMPLE
[1234 @ logger]$ loginfo
Error Trace
Info Trace
Server Address
User Name
Password

2.4 User Account

A default user account is provided to configure, maintain, and operate the endpoint in HTTP
(web), CLI, and FTP modes. The default user name is 1234, and the default password 1234. To
add, modify, delete, or list the user name and password, enter the auth directory.
[1234 @ home]$ auth
At the auth directory, you can use the 'ls' command to display the available commands:
[1234 @ home]$ auth
[1234 @ auth]$ ls
A <CMD> adduser
A <CMD> deluser
A <CMD> changepasswd
A <CMD> modifyuser
A <CMD> listusers
A <CMD> resetuser
[1234 @ auth]$
There are three management modes and two access privileges. The three modes are cli, http, and
ftp. The cli and http modes provide full parameters to configure, maintain, operate, and monitor
the endpoint. The ftp mode only allows software upgrade, configuration upgrade, and
configuration backup.
20
: OFF
: OFF
: 192.168.26.10
: firewall
: firewall
1800-A2-GB20-00