Listdevices; Example - Paradyne 6212 User Manual

8.3.4

listdevices

Command syntax:
listdevices
Usages:
List subscribed devices.
8.3.5

Example

Assumption that no station connected to AP. First we set the "AssocTime" interval
to 1 minute. And we get the "AssocTime" interval. Then we list subscribed devices. It's a
blank list, because nobody connected to AP.
We start association to allow station connecting to AP. The station A (MAC address
is 00:0D:88:87:E5:DE) connects to AP in a moment. We show the remainder
association time. We list subscribed devices and find the entry #01 station A in the
subscribed devices list.
Finally we disassociate the station A. And we list subscribed devices again. It
become a blank list, because the station don't connect to AP.
Below are the steps of this example.
------------------------------------------------------------------------------------------------------
[root @ home]$ wlan
[root @ wlan]$ wlancfg set AssocTime=1
[root @ wlan]$ wlancfg get AssocTime
AssocTime : 1 mins
[root @ wlan]$ listdevices
Subscribed devices list
=============== Entry ===============
[root @ wlan]$ association
1800-A2-GB20-00
Command Line Interface User's Guide
133