Part 2 Set The Pvc To Rfc 1483 Routed; Part 3 Set Up An Ip Address For The Wan Interface; Part 4 Delete The Pvc To Rfc 1483 Routed - Paradyne 6212 User Manual

3. At the atm prompt, type home or exit to return to the home prompt.
3.2.2

PART 2 Set the PVC to RFC 1483 Routed

1. Return to the home prompt.
2. Type sndcp to enter the sndcp prompt.
3. Type routedbridge atm0 enable 0 35 -o -enc LLC. In this case, atm0 is used. You can
choose other atm interface if you wish. In addition, in the command, LLC must be
capitalized.
4. If the sndcp prompt pops up, a PVC 0/35 is successfully created for RFC 1483 Routed mode.
3.2.3

PART 3 Set up an IP address for the WAN interface

1. Return to the home prompt and type the following command.
If you need the usage of the ifconfig command, type ifconfig.
2. If the Ethernet IP address is successfully set up, the home prompt pops up.
3.2.4

PART 4 Delete the PVC to RFC 1483 Routed

To delete the PVC set up for the RFC 1483 Routed, you must disable the service first under the
sndcp directory. Secondly, delete the VC under the atm directory. The following screen is an
example.
1800-A2-GB20-00
Command Line Interface User's Guide
31