Dnsr - Paradyne 6212 User Manual
Command line interface for voip gateways, sip iad and router
Hide thumbs
Also See for 6212:
- User manual (102 pages) ,
- Quick installation instructions (2 pages) ,
- Quick installation instructions (1 page)
Table of Contents
Advertisement
[cli @ dns]$ set –n1 137.23.41.2
This command sets the primary name server for DNS queries.
[cli @ dns]$ set –n1 0
This command removes the primary name server.
5.12.3
dnsr
dnsr start -o [<server1>] [<server2>]
dnsr stop -o [<server1>] [<server2>]
This command enables/disables the DNS relay function.
COMMAND DESCRIPTION
start
This starts the DNS relay function
stop
This stops the DNS relay function.
<server1>
IP address of the primary DNS server.
<server2>
IP address of the secondary DNS server.
1800-A2-GB20-00
Command Line Interface User's Guide
99
Advertisement
Table of Contents
