Policy Delete; Policy Modify - Paradyne 6212 User Manual

Command Line Interface User's Guide
COMMAND DESCRIPTION
policy set <Policy-ID > <RxIfName> <TxIfName> <Sequence> {Allow|Deny}
[srcip <a.b.c.d> [<e.f.g.h>]]
[dstip <a.b.c.d> [<e.f.g.h>]]
[sport <p1> [<p2>]]
[dport <p1> [<p2>]]
[proto <Protocol>]
[nat <NAT-Action-ID>]
This command is used to add firewall rule.
5.5.2

policy delete

policy delete <QoS-Policy-ID>
Delete the firewall rule.
5.5.3

policy modify

policy modify
policy modify <Policy-ID> <RxIfName> <TxIfName> <Sequence>
[srcip <a.b.c.d> [<e.f.g.h>]]
[dstip <a.b.c.d> [<e.f.g.h>]]
[sport <p1> [<p2>]]
[dport <p1> [<p2>]]
[proto <Protocol>]
[nat <NAT-Action-ID>]
Modify the firewall rule.
70
{Allow|Deny}
1800-A2-GB20-00