Part 3 Delete The Pvc For Pppoe - Paradyne 6212 User Manual

Command Line Interface User's Guide
The pppoe command covers the settings for the PPPoE entry number, encapsulation type,
timeout period, authentication, user name, password, VPI, VCI, and NAT. You can complete a
PPPoE entry by typing this command that covers these basic settings. If you need a complete
setting, refer to the usage instruction above.
4. If the sndcp prompt pops up, a PVC 0/35 is successfully created for PPPoE mode.
3.4.3

PART 3 Delete the PVC for PPPoE

To delete the PVC set up for the PPPoE, you must delete the profile first under the sndcp prompt.
Secondly, delete the VC under the atm prompt. The following screen is an example.
34 1800-A2-GB20-00