Downloading The Configurations - Paradyne 6212 User Manual

7.5 Downloading the Configurations

1. At the tftp prompt, type connect xxx.xxx.xxx.xx.
tftp> connect 172.16.4.16
connected to : 172.16.4.16
A message, "connected to : xxx.xxx.xxx.xxx," pops up if successful.
2. Type the transfer mode (binary or ascii).
tftp> binary
mode set to octet
A message, "mode set to octet/netascii," pops up.
3. Type get para. The configuration file is saved as param at the target location. If the
configuration file name is param, you can also skip the file name by simply typing get param.
4. The tftp prompt pops up when the download is successful.
1800-A2-GB20-00
Command Line Interface User's Guide
127