Igmp Proxy - Paradyne 6212 User Manual

Command Line Interface User's Guide

5.13 IGMP Proxy

To set up the IGMP proxy, use the command igmp proxy to display the commands for IGMP.
igmp -o -proxyif <interface>
igmp -o -routerif <interface>
igmp -o -deleteif <interface>
igmp -o -display
COMMAND DESCRIPTION
-proxyif <interface>
This option sets the proxy interface. Typically a LAN interface (eth0) is specified. When the
proxy interface is successfully configured, the home prompt displays.
EXAMPLE
[1234 @ home]$ igmp -o -proxyif eth0
[1234 @ home]$
-routerif <interface>
This option sets the router interface. Typically a WAN interface (ATM0, PPP0) is specified.
When the router interface is successfully configured, the home prompt displays.
EXAMPLE
[1234 @ home]$ igmp -o -routerif atm0
[1234 @ home]$
-deleteif <interface>
This option deletes either the proxy or router interface.
-display
This option displays the group in all interfaces.
100 1800-A2-GB20-00