Part 3 Delete The Pvc For Rfc1483 Bridged; Rfc 1483 Routed; Part 1 Create A New Vc - Paradyne 6212 User Manual

Command Line Interface User's Guide
5. Type bridge enable.
6. If the bridge prompt pops up, a PVC 0/35 is successfully enabled for the RFC 1483 Bridged
mode.
3.1.3

PART 3 Delete the PVC for RFC1483 Bridged

To delete the PVC set up for the RFC 1483 Bridged, you must delete the service first under the
bridge prompt. Secondly, delete the VC under the atm prompt. The following screen is an
example.

3.2 RFC 1483 Routed

There are two major parts to set up a RFC 1483 Bridged PVC. The first part is to add a PVC
under the atm directory. The second part is to assign the new PVC to the RFC1483 Bridged
mode under the bridge directory. The following is an example of adding an RFC1483 Bridged
PVC at 0/35.
3.2.1

PART 1 Create a new VC

1. Type atm to enter the home prompt.
2. Type vcadd 0 35 ubr aal5
30 1800-A2-GB20-00