Chapter 9 Software Upgrade Via Ftp - Paradyne 1862 User Manual

1862 VoIP IAD User's Guide
Chapter 9 Software Upgrade via FTP
Follow the steps below to upgrade the firmware version of the IAD via FTP. The procedures
below will use LAN port IP address 192.168.1.1 for illustration.
STEP 1: Connect the IAD to a PC using the LAN cable. Set the PC to the same subnet as the
IAD (192.168.1.1).
STEP 2: Start DOS and enter the menu where the new firmware is installed:
Example: C:\Upgrade
STEP 3: Enter the command: ftp 192.168.1.1 (IAD's IP address)
STEP 4: At the USER prompt type root (small case)
STEP 5: At the Password prompt type 1234
STEP 6: After you see the message User Logged in, type: Bin
STEP 7: After you see the message Type set to I, type: hash
STEP 8: After you see the message Hash mark printing, type: put <filename.bin> app
Example: put firmware app
63