Connecting A High-Resolution Digital Display Device; Connecting A Usb Mouse, Keyboard, Printer, Or Other Usb Device - Matrox 4Sight X Installation And Hardware Reference

USB connectors
USB header
USB connectors on
the motherboard

Connecting a USB mouse, keyboard, printer, or other USB device

4. Set the switches for the synchronization inputs according to your device's manual.
In most cases, these switches should be set to high impedance and external
synchronization mode.

Connecting a high-resolution digital display device

You can connect a digital display device (such as a digital flat panel) to the DVI-D
connector using the cable provided with your display device.
Connecting a USB mouse, keyboard, printer,
or other USB device
You can connect any USB-compliant mouse, keyboard, or printer to one of the
six USB connectors. Four USB connectors are located on the front panel of the
Matrox 4Sight X unit, and two USB connectors are contained inside the unit (on
the motherboard). The USB connectors are USB 2.0 and 1.1 compatible.
❖ Note that USB hubs can also be used to connect multiple USB devices to the
Matrox 4Sight X unit.
You can also connect a 10-pin USB flash module, or two additional 4-pin
USB devices, to the USB header on the motherboard. A USB flash module is a
USB storage device using flash memory technology.
For information about connecting USB devices to the internal USB connectors,
see Chapter 3: Adding devices to the Matrox 4Sight X motherboard.
35