Installing Pci-104 And/Or Pci/104-Express Boards In The Pci/104-Express Matrox 4Sight X Unit - Matrox 4Sight X Installation And Hardware Reference

Installing PCI-104 and/or PCI/104-Express boards in the PCI/104-Express Matrox 4Sight X unit

Installing PCI-104 and/or PCI/104-Express
boards in the PCI/104-Express
Matrox 4Sight X unit
You can connect a total of three PCI-104 or PCI/104-Express boards to the
motherboard of the PCI/104-Express Matrox 4Sight X unit. The boards are
connected in a stack-through configuration, as shown below. Each board must be
attached to the other through four jack screws.
In the illustration below, one PCI/104-Express board and two PCI-104 boards
are being connected to the Matrox 4Sight X motherboard.
Top-most board fitted
with top-screws
Fit jack-screws inside
appropriate holes.
Connect the jack-
screws together.
Matrox 4Sight X
motherboard
PCI-104 board
(module 3)
PCI-104 board
(module 2)
PCI/104-Express board
(module 1)
PCI
connector
71
PCIe
connector